Manual Warrior Swing-blade Sawmill
Complete Warrior sawmill.
Our manual sawmills offer a truly portable option. The Honda engine takes only a few minutes to remove from the carriage. The sawmill then can be carried into the bush and setup over the log as it lays.
The carriage is simply rolled off the rail at any end of the beam.
The post is then un-clipped via the wire rope and is removed from the beam and ground base skid supports.
A total of 7 parts can then be hand carried remotely. An extremely versatile option when portability is your preference.
1 x 4-tooth INSERT blade, tool, extra tips and sharpener.
Manual blade swing.
Single end horizontal sizing. Double end vertical sizing.
Log setup taper alignment included.
1 meter diameter (3 foot) log - although any diameter may be sawn.
4.2 meter (14 foot) log cut length.
Double cut capable.
Honda petrol power plant:
Model 6 (6" x 6" standard cut, 5" x 12" double cut), fitted with Honda Petrol 13hp (gross) (pull start included) engine. $12,500 CAD.
Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Honda Petrol 13hp (gross) (pull start included) engine. $15,500 CAD.
Model 6 (6" x 6" standard cut, 5" x 12" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $14,000 CAD.
Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $17,000 CAD.
Electric power plant:
Model 6 (6" x 6" standard cut, 5" x 12" double cut), fitted with 3-phase electric 10hp motor DOL. $14,000 CAD.
Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with 3-phase electric 10hp motor DOL. $17,000 CAD.
What makes our mills stand out?
Open access to load your logs and remove timber (without the possibility of damaging your tracks. You're not stuck in a portal restricting your options.
The mono rail means you're mill will always pull straight - its not dependent on how or where you pull. It will cut straight no matter what.
Our mills now have a 40hp capacity heavy duty Curtis gearbox (made in the US). The driven pulley is also mounted on the other side of an outrigger bearing - meaning the pressure provided by the belt is off the gearbox. This is the number one fault with most swing blade sawmills.
We have full taper ability along with single end sizing, making our mills very easy to align to the log and to set you're sizes.
The swing apparatus is effortless. We also have weather board options available to coincide with its simplicity.
All our mills have the ability to double cut straight off the log - no turning the mill around (its designed into the concept). Our mills don't require any 180 degree swing function - this facility has no relationship to any extra ability regarding double cutting.
Portability. Our mills can be provided with a simple dolly trailer system. They can also be transported via a small jockey arrangement optional with the sawmill. They do break down too. Lots of options for easy 10-30 minute setup/breakdown.
A major hidden advantage with our saw is that there is no need to start vertical first followed by horizontal as your finishing cut. Simply start horizontal and finish with vertical - no wedging required. Just grab your cut timber and start again.
Sharpening takes literally seconds with our simple 6-tooth saw blade. This design means our mills put LESS strain on the blade prolonging the life of your gearbox, bearings and belts.
We have thin-kerf, slabber and planer blade attachments available for all mills.
Saw any diameter logs.
Price, production, simplicity and portability - you cant beat it!